ASN 12 | 17,5 | 24 | 36 Support type current transformers Block transformers, large design DIN 42600, part 5. The current transformers are fully encapsulated in brown epoxy resin. The active part consists of one or more toroidal cores with homogeneously applied secondary winding and primary winding. The secondary terminal box can be sealed. Each secondary clamp can be screwed through directly. On delivery, the first terminal of each core is visibly connected to earth. A transformer earthing connection is located on the side of the transformer opposite the terminal box..
ASN 12 | 17,5 | 24 | 36 Support current transformer. The terminal box provides space for 6 secondary terminals, so that a maximum of 3 cores can be supplied in one transformer. On request, the transformers can be equipped with a capacitive divider, which offers the possibility of voltage indication via a glow lamp via an additional Ck clamp in the terminal box. Primary switching and secondary tapping are possible. Special versions: Tropical version, rated frequency 60 Hz, primary switchable 1:2:4, secondary taps for various primary rated currents, standards of other countries, primary continuous current > 1.0 Ipn, CK terminal for voltage displays with surge arrester.
|MV Instrument Transformer||Yes|
|MV Protection Transformer||Yes|
|Ambient Temperature -5°C ... +40°C||Yes|
|Capacitive Tap, CK Clamp, Capacitive Divider||Yes|
|Overlaod Capability ext. 120%||Yes|
|Declaration of Conformity||Yes|
|Mounting Position||upright position|
|Cast Resin Insolation||Yes|
|Ground Connection Clamp||Yes|
|Insulating Material Class E (120°C)||Yes|
|Place of Manufacture||Made in Hungary|