LGSO 10...30 Indoor window-type current transformer
direct rating up to 20.000/1A (higher rates on request).
The transformers are single-wire current transformers for use in encapsulated generator leads with insulated phases for Um = 12...36 kV, with cast resin and air insulation. The primary insulation consists of an air gap and a cast resin insulation. The core with secondary winding has been cast in a single operation in the metal housing. The primary conductor must be positioned exactly concentrically to the transformer. Grounding of the secondary terminals directly on the transformers is not possible. The earthing of the sheath is done by fixing the transducer in the application.
LGSO 10...30 Indoor window-type current transformer-Generator Transformer
It is installed in air duct tubes by means of threaded socket connections on the outer surface of the transformers. The secondary connections are located on the outer surface of the transformer. After mounting the transformer in the air duct tube, the secondary connections are located in an encapsulated terminal box which is located on the tube.
|MV Instrument Transformer||Yes|
|MV Protection Transformer||Yes|
|For Tropical Ambient||Yes|
|Ambient Temperature -5°C ... +40°C||Yes|
|Overlaod Capability ext. 120%||Yes|
|Declaration of Conformity||Yes|
|Mounting in any Position||Yes|
|Cast Resin Insolation||Yes|
|Ground Connection Clamp||Yes|
|use on generator||Yes|
|Insulating Material Class E (120°C)||Yes|
|Made in Austria||Yes|